The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and custom-made laser parts, which are reinforced in areas subject to heavy wear. 

The carriers can be attached and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws by a quarter turn and you can then remove the side parts to the rear or to the side. As an anti-theft measure, you can optionally protect the carrier from thieves with our lockable Lock-it screws.
All cases are locked to the carrier using a retaining lock on the case. To do this, you need the lock adapters which are normally included with the case. The lock adapters are screwed to the carrier on the right and left and then provide a fastening option for the case's retaining locks.

• stable construction MADE IN GERMANY
• quickly removable, only inconspicuous small tabs remain on the motorcycle
• high-quality surface finish
• Usually easy to assemble, please refer to the assembly instructions provided
• Scope of delivery: right + left including mounting material and assembly instructions
• Please refer to the vehicle-specific instructions or the installation instructions to find out whether there are any restrictions
• Suitable for most Hepco&Becker hard shell side cases (please note model-specific information)
• Pipe diameter: 16 mm