Give your BMW R 1250 R (2019-2025) a touch of versatility with the Hepco&Becker Lock-it side case carrier in deep black. These carriers are made from German tubular steel and customised laser-cut parts, which are additionally reinforced in areas subject to high stress. These carriers can be fitted and removed in next to no time. All you have to do is turn the integrated Lock-it screws by a quarter and you can effortlessly remove the side panels to the rear or to the side. For additional theft protection, you can optionally use our lockable Lock-it screws to thwart thieves. All your cases are securely locked to the carrier with a retaining lock. To do this, you need the lock adapters that are normally included with the cases. These adapters are attached to the right and left of the carrier and provide a secure anchorage for the case retaining locks. The robust construction bears the "MADE IN GERMANY" seal of quality. After dismantling, only inconspicuous small tabs remain on your motorbike. The surface impresses with a high-quality finish. Installation is generally straightforward, but for safety reasons we recommend following the enclosed installation instructions. The scope of delivery includes both the right and the left carrier, all necessary installation material and detailed installation instructions. Please check the vehicle-specific information or the installation instructions for possible restrictions. These carriers are compatible with most Hepco&Becker hard-shell side cases (please observe model-specific instructions). As a rule, no ABE (general type approval) or registration is required for luggage systems. The tube diameter is 16 mm.