The Hepco&Becker Lock-it side case carrier - Made from German tubular steel and custom-made laser parts, which are reinforced at heavily stressed areas. 

The carriers can be attached and removed in seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and you can remove the side panels to the back or to the side. To protect against theft, you can optionally protect the carrier from thieves with our lockable Lock-it screws.
All suitcases are locked to the carrier using a holding lock located on the suitcase. For this, you need the lock adapters which are normally included in the scope of delivery of the case. The lock adapters are screwed to the left and right of the carrier and then offer a fastening option for the holding locks of the case.

• stable construction MADE IN GERMANY
• Quickly detachable, only inconspicuous small tabs remain on the motorcycle
• high-quality surface finish
• Normally easy to assemble, please refer to the assembly instructions provided
• Scope of delivery: right + left incl. mounting material and assembly instructions
• Please refer to the vehicle-specific information or the assembly instructions to determine whether there are any restrictions
• Suitable for most Hepco&Becker hard shell side cases (please note model-specific information)
• Tube Diameter: 16mm